BEVELTOOLS
Bevel Prep Disc
A ceramic-grain flap disc that removes the hardened, oxide-bearing edge left by laser and plasma cutting before chamfering, rounding or deburring. Ø115 and Ø125 mm; flat (T27) and conical (T29) backing; P40 and P60 grit.
Products
- Bevel Prep Disc (115mm T27 P40)115 mm flat T27 — P40 coarseBEVEL-8600001
- Bevel Prep Disc (115mm T27 P60)115 mm flat T27 — P60 fineBEVEL-8600002
- Bevel Prep Disc (115mm T29 P40)115 mm conical T29 — P40 coarseBEVEL-8600003
- Bevel Prep Disc (115mm T29 P60)115 mm conical T29 — P60 fineBEVEL-8600004
- Bevel Prep Disc (125mm T27 P40)125 mm flat T27 — P40 coarseBEVEL-8600005
- Bevel Prep Disc (125mm T27 P60)125 mm flat T27 — P60 fineBEVEL-8600006
- Bevel Prep Disc (125mm T29 P40)125 mm conical T29 — P40 coarseBEVEL-8600007
- Bevel Prep Disc (125mm T29 P60)125 mm conical T29 — P60 fineBEVEL-8600008
Specifications
| Disc Type | T27 · T29 |
|---|---|
| Disc Diameter (mm) | 115 mm · 125 mm |
| Grit | P40 · P60 |
Advantages
The First Step Before Bevelling
Removes the hardened, oxide-bearing edge left by laser and plasma cutting before chamfering, rounding or deburring.
Longer Cutter Life
With the hard skin taken off first, Beveltools carbide cutters work less hard and last longer. The slight angle of a plasma edge is trued too, so a radius cutter rounds cleanly.
ACTIROX Ceramic Grain
VSM ACTIROX ceramic grain removes the hard edge quickly and in a controlled way, with an aggressive cut and a consistent finish.
Options
Ø115 and Ø125 mm, flat (T27) and conical (T29) backing, P40 and P60 grit. Fits an angle grinder; packs of 5.
Products
Features
- Used before chamfering, rounding and deburring
- Removes the hardened, oxide-bearing edge left by laser and plasma cutting
- Extends the service life of Beveltools carbide cutters
- ACTIROX ceramic grain (VSM): aggressive cut, consistent finish
- Ø115 and Ø125 mm; flat (T27) and conical (T29) backing
- P40 and P60 grit
- Fits an angle grinder · packs of 5
The Bevel Prep Disc is the right first step before chamfering, rounding or deburring. Laser and plasma cutting leave a hardened, oxide-bearing layer on the cut edge; if it is not removed first, Beveltools carbide cutters work harder and wear sooner. A plasma-cut edge is also often slightly angled, which keeps a radius cutter from rounding cleanly, so the edge should be trued first. Thanks to ACTIROX ceramic grain (VSM), the disc removes the hardened cut edge quickly and in a controlled way, with an aggressive cut and a consistent finish. The cutter gets a clean surface, Beveltools cutters last longer and the bevelling job gets a better starting point. Fits an angle grinder. Options: Ø115 and Ø125 mm diameter, flat (T27) and conical (T29) backing, P40 and P60 grit. All codes are sold in packs of 5.
Compatible Machines
The machines this accessory is recommended for. Pick one to open its page.
Would you like help choosing the right model?
Let our specialists pick the BEVELTOOLS model that fits your application and prepare a quote.